Register    Login    Forum    Search    FAQ

Board index » MotioninJoy install and config » Windows 64bits system




Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: DS3 Tool not working
 Post Posted: Thu Oct 07, 2010 11:40 am 
Offline
user

Joined: Thu Oct 07, 2010 10:58 am
Posts: 9
Hi, i have install the last version v.6 and everytime i try to start the DS3 Tool it crashes. any ideas?

I have windows 7 ultimate 64.


Top 
 Profile  
 
Sponsor
 Post subject: Re: DS3 Tool not working
 Post Posted: Fri Oct 08, 2010 10:25 pm 
Offline
user

Joined: Thu Oct 07, 2010 10:58 am
Posts: 9
i managed to install the driver with an early version, the drivers work fine, the controller is recogniced and i can push all the buttons in the device configuration menu.
But i cant get DS3 tool to work! it crashes everytime i try to use it

HELP!


Top 
 Profile  
 
 Post subject: Re: DS3 Tool not working
 Post Posted: Sat Oct 09, 2010 1:17 am 
Offline
MotioninJoy Guru
User avatar

Joined: Fri May 14, 2010 4:20 am
Posts: 1264
bromthyrant wrote:
i managed to install the driver with an early version, the drivers work fine, the controller is recogniced and i can push all the buttons in the device configuration menu.
But i cant get DS3 tool to work! it crashes everytime i try to use it

HELP!


Uh oh UNINSTALL PREVIOUS DRIVER IMMEDATELY!

You needd to use the same driver version with the same DS3 Tool version.

What driver version and what OS are you using? What is the error that comes up when the DS3 Tool crashes?

Do you have IE8 installed with Javascript enabled? Do you have .NET framework 3.5 installed?

_________________
< Install the MotioninJoy Drivers | MiJ: FAQ | Compatibility | Install Local mode | :arrow: More >


Top 
 Profile  
 
 Post subject: Re: DS3 Tool not working
 Post Posted: Sat Oct 09, 2010 2:59 am 
Offline
user

Joined: Thu Oct 07, 2010 10:58 am
Posts: 9
xtr_desert wrote:
bromthyrant wrote:
i managed to install the driver with an early version, the drivers work fine, the controller is recogniced and i can push all the buttons in the device configuration menu.
But i cant get DS3 tool to work! it crashes everytime i try to use it

HELP!


Uh oh UNINSTALL PREVIOUS DRIVER IMMEDATELY!

You needd to use the same driver version with the same DS3 Tool version.

What driver version and what OS are you using? What is the error that comes up when the DS3 Tool crashes?

Do you have IE8 installed with Javascript enabled? Do you have .NET framework 3.5 installed?


I revert all to zero
uninstall everyting.

i did this tutorial:
viewtopic.php?f=36&t=988
well is my native language.

i got to sign the drivers, plug the controller. got installed everything fine. all the buttons works in the gamepad configuration.

i have IE8 installed with Javascript enabled and .NET framework 3.5 installed

still ds3 tool crashes. it gives me the next error:

Descripción:
Stopped working

Firma con problemas:
Nombre del evento de problema: CLR20r3
Firma del problema 01: ds3_tool.exe
Firma del problema 02: 0.4.0.0
Firma del problema 03: 4ca6a494
Firma del problema 04: System.Drawing
Firma del problema 05: 2.0.0.0
Firma del problema 06: 4a275e83
Firma del problema 07: 7af
Firma del problema 08: 70
Firma del problema 09: System.ArgumentException
Versión del sistema operativo: 6.1.7600.2.0.0.256.1
Id. de configuración regional: 11274


Top 
 Profile  
 
 Post subject: Re: DS3 Tool not working
 Post Posted: Sat Oct 09, 2010 4:25 am 
Offline
MotioninJoy Guru
User avatar

Joined: Fri May 14, 2010 4:20 am
Posts: 1264
Hmm..The log there kinda sounds like you have the v4 DS3 Tool? :| did you have the v4 drivers installed before the v6 ones?

Close the DS3 Tool (also close it out of system tray too) and then completely uninstall MiJ, then reinstall the v6 drivers.

_________________
< Install the MotioninJoy Drivers | MiJ: FAQ | Compatibility | Install Local mode | :arrow: More >


Top 
 Profile  
 
 Post subject: Re: DS3 Tool not working
 Post Posted: Sat Oct 09, 2010 7:30 am 
Offline
user

Joined: Thu Oct 07, 2010 10:58 am
Posts: 9
xtr_desert wrote:
Hmm..The log there kinda sounds like you have the v4 DS3 Tool? :| did you have the v4 drivers installed before the v6 ones?

Close the DS3 Tool (also close it out of system tray too) and then completely uninstall MiJ, then reinstall the v6 drivers.


Weird the DS3 tool that comes with the v6 version it says in the properties tab that is v 0.4.0.0 :s


Top 
 Profile  
 
 Post subject: Re: DS3 Tool not working
 Post Posted: Sat Oct 09, 2010 9:36 pm 
Offline
MotioninJoy Guru
User avatar

Joined: Fri May 14, 2010 4:20 am
Posts: 1264
Yes weird...not sure if I read that log right or not... Anyways uninstall the drivers completely and then reinstall like said before.

_________________
< Install the MotioninJoy Drivers | MiJ: FAQ | Compatibility | Install Local mode | :arrow: More >


Top 
 Profile  
 
 Post subject: Re: DS3 Tool not working
 Post Posted: Sat Oct 09, 2010 9:52 pm 
Offline
user

Joined: Thu Oct 07, 2010 10:58 am
Posts: 9
uninstalled all, clean with regcleaner and search and delete every entry related to ds3 tool and motionjoy.

Clean install, and again: i got to sign the drivers, plug the controller. got installed everything fine. all the buttons works in the gamepad configuration. except for the analog joysticks.

run ds3 tool and BANG! still crashes at beggining "ds3 tool stop working"

running windows ultimate 64 bits, i have IE8 installed with Javascript enabled and .NET framework 3.5 installed

no clue whats the problem but is the ds3 tool itself


Top 
 Profile  
 
 Post subject: Re: DS3 Tool not working
 Post Posted: Sat Oct 09, 2010 9:54 pm 
Offline
MotioninJoy Guru
User avatar

Joined: Fri May 14, 2010 4:20 am
Posts: 1264
Wow... that is weird.

Have you virus scanned lately?

Not sure what else to tell you...

_________________
< Install the MotioninJoy Drivers | MiJ: FAQ | Compatibility | Install Local mode | :arrow: More >


Top 
 Profile  
 
 Post subject: Re: DS3 Tool not working
 Post Posted: Sat Oct 09, 2010 9:58 pm 
Offline
user

Joined: Thu Oct 07, 2010 10:58 am
Posts: 9
there is an alternative to configurate the joystick besides the ds3 tool?


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

Board index » MotioninJoy install and config » Windows 64bits system


Who is online

Users browsing this forum: Google Adsense [Bot] and 11 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: