| Author |
Message |
|
Kergadon
|
Post subject: Error code 2  Posted: Tue Jul 20, 2010 1:48 pm |
|
 |
| user |
Joined: Tue Jul 20, 2010 1:45 pm
Posts: 1
|
|
  |
|
 |
| Sponsor |
|
|
|
extra_dessert
|
Post subject: Re: Error code 2 Posted: Wed Jul 21, 2010 12:04 am |
|
|
| MotioninJoy Guru |
 |
Joined: Fri May 14, 2010 4:20 am
Posts: 1264
|
|
When are you getting this error code? Can you post the driver install log?
(Tip for noobs: The more info you include in your post the better!!!)
|
|
| |
|
|
|
lonewolf00708
|
Post subject: Re: Error code 2 Posted: Fri Dec 17, 2010 3:45 pm |
|
|
| user |
Joined: Fri Dec 17, 2010 3:44 pm
Posts: 3
|
|
This may take a few seconds.Please wait a moment!INFO:ENTER: DriverPackageInstallW
WARNING:DRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.
INFO:Looking for Model Section [MotioninJoy.NTx86.6.0]...
INFO:Installing INF file 'C:\Program Files\MotioninJoy\ds3\drivers\MijXinput.inf' (Plug and Play).
INFO:Looking for Model Section [MotioninJoy.NTx86.6.0]...
INFO:Installing devices with Id "USB\VID_054C&PID_0268&REV_0100" using INF "C:\Windows\System32\DriverStore\FileRepository\mijxinput.inf_x86_neutral_31adb4c6be40bb31\mijxinput.inf".
INFO:Will force install because driver is not better and force flag is set.
INFO:ENTER UpdateDriverForPlugAndPlayDevices...
ERROR:RETURN UpdateDriverForPlugAndPlayDevices.. Error code:2
ERROR:Installation failed.. Error code:2
ERROR:PnP Install failed.. Error code:2
INFO:Attempting to rollback ...
SUCCESS:Rollback completed
INFO:RETURN: DriverPackageInstallW (0x2)
|
|
| |
|
|
|
Acxie
|
Post subject: Re: Error code 2 Posted: Fri Dec 17, 2010 3:59 pm |
|
|
| MotioninJoy Developer |
Joined: Mon Jul 27, 2009 11:29 pm
Posts: 709
|
|
Error code 2 means :The system cannot find the file specified.
Did you install the setup package fully?
And try to run DS3_TOOL as admin.
|
|
| |
|
|
|
CCFROMAN
|
Post subject: Re: Error code 2 Posted: Thu Jan 20, 2011 6:40 am |
|
|
| user |
Joined: Thu Jan 20, 2011 6:39 am
Posts: 1
|
|
ok, i've gotten this error code 2, help is much appreciated....
INFO:InstallDriver start...
SUCCESS:Set Selected Device.
SUCCESS:Get Device Install Params.
SUCCESS:Set Device Install Params.
SUCCESS:Building Driver Info List.
SUCCESS:Call Class Installer.
SUCCESS:Get MotioninJoy Driver.
SUCCESS:Install MotioninJoy Driver start......
ERROR:Install MotioninJoy Driver fail.. Error code:2
|
|
| |
|
|
|
extra_dessert
|
Post subject: Re: Error code 2 Posted: Thu Jan 20, 2011 7:36 am |
|
|
| MotioninJoy Guru |
|
Joined: Fri May 14, 2010 4:20 am
Posts: 1264
|
|
CCFROMAN, try installing in local mode and see if that helps.
|
|
| |
|
|
|
zllily
|
Post subject: Re: Error code 2 Posted: Wed Sep 26, 2012 9:02 am |
|
|
| user |
Joined: Sat Sep 22, 2012 3:17 pm
Posts: 9
|
|
| |
|
|
|
More
Bluetooth 2.1+EDR Adapter for MotioninJoy