Register    Login    Forum    Search    FAQ

Board index » MotioninJoy install and config » Windows 64bits system




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: BSOD
 Post Posted: Wed Aug 11, 2010 4:18 pm 
Offline
user

Joined: Wed Aug 11, 2010 2:25 am
Posts: 6
so this has only happened twice yet, but from what i've seen so far, after the controller has been plugged in and the ds3 tool turned on, and i leave my computer idling for awhile, it goes to the blue screen of death.
Im not sure if it does it with the software alone, or with the controller alone, however i do know that i have unplugged the controller from the laptop atleast one of htose times (possibly both) sometime before i left the laptop idle and got the blue screen error.

I have never gotten the error on this laptop before, and im fairly certain its being caused by something to do with the ps3 controller. so any help would be appreciated on this matter.


Top 
 Profile  
 
Sponsor
 Post subject: Re: BSOD
 Post Posted: Wed Aug 11, 2010 10:48 pm 
Offline
MotioninJoy Guru
User avatar

Joined: Fri May 14, 2010 4:20 am
Posts: 1264
The MiJ drivers seem to BSOD when the controller / BT dongle is unplugged but was in use at the time (like a game or JoytoKey was using it).

Don't unplug the controller unless you are certain nothing is using it, or reboot to unplug the controller.

_________________
< Install the MotioninJoy Drivers | MiJ: FAQ | Compatibility | Install Local mode | :arrow: More >


Top 
 Profile  
 
 Post subject: Re: BSOD
 Post Posted: Thu Aug 12, 2010 3:51 am 
Offline
user

Joined: Wed Aug 11, 2010 2:25 am
Posts: 6
so simply closing the ds3 tool wont work i assume.
What should i close with task manager then?

I appreciate the help~


Top 
 Profile  
 
 Post subject: Re: BSOD
 Post Posted: Thu Aug 12, 2010 3:57 am 
Offline
MotioninJoy Guru
User avatar

Joined: Fri May 14, 2010 4:20 am
Posts: 1264
Squeezit wrote:
so simply closing the ds3 tool wont work i assume.
What should i close with task manager then?


???????????

I think you misread my post.

You unplugged the controller and then got a BSOD, right? Anyways a lot of times the MiJ drivers will BSOD when the controller is unplugged and it was in use.

_________________
< Install the MotioninJoy Drivers | MiJ: FAQ | Compatibility | Install Local mode | :arrow: More >


Top 
 Profile  
 
 Post subject: Re: BSOD
 Post Posted: Thu Aug 12, 2010 9:41 am 
Offline
MotioninJoy Developer

Joined: Mon Jul 27, 2009 11:29 pm
Posts: 710
I have fixed this issue and will release the new version as soon as possible.

_________________
Recommended ImageBluetooth 2.1+EDR Adapter for MotioninJoy


Top 
 Profile  
 
 Post subject: Re: BSOD
 Post Posted: Thu Aug 12, 2010 9:43 am 
Offline
user

Joined: Wed Aug 11, 2010 2:25 am
Posts: 6
ah that works thanks. and yeah it was maybe a couple hours or so after i unplug the controller,


Top 
 Profile  
 
 Post subject: Re: BSOD
 Post Posted: Mon Aug 16, 2010 2:53 am 
Offline
user

Joined: Thu Aug 12, 2010 6:26 pm
Posts: 17
I hope the next version takes care of this, I get a BSoD literally every time I disconnected my controller, even if I close everything, regardless of whether I click 'disconnect' on DS3_tool or not.


Top 
 Profile  
 
 Post subject: Re: BSOD
 Post Posted: Thu Jan 05, 2012 12:03 am 
Offline
user

Joined: Wed Jan 04, 2012 11:59 pm
Posts: 2
I still get the BSOD when i disconnect my ps3 controller plz help i even updated the DS3 to the latest version


Top 
 Profile  
 
 Post subject: Re: BSOD
 Post Posted: Sat Jan 14, 2012 7:31 am 
Offline
user

Joined: Sun Jan 08, 2012 6:09 pm
Posts: 4
I use version 0.6.0005 for Driver and DS3 Tool. I have noticed that after letting my controller recharge while connected to the USB, I get the BSOD when unplugging the controller. I'm using Windows 7 Ultimate x64. It also appears that I can't recharge my controller with the PS3 anymore while it's paired to my PC. Maybe It is recharging and I'm just not seeing any lights to indicate it, I'll have to check on that.


Top 
 Profile  
 
 Post subject: Re: BSOD
 Post Posted: Sat Feb 11, 2012 1:03 am 
Offline
user

Joined: Sun Jan 08, 2012 6:09 pm
Posts: 4
extra_dessert wrote:
You unplugged the controller and then got a BSOD, right? Anyways a lot of times the MiJ drivers will BSOD when the controller is unplugged and it was in use.

Does recharging count as in use? Because I wasn't using it for anything else. I was not running any gaming software and I had exited DS3 Tool (from the system tray) and I still got the BSOD. The controller had been on overnight, and the LED's were all lit and static (not blinking). I assume this means it was fully charged. When I unplugged it, BSOD !

Regards,
Lardzor


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 10 posts ] 

Board index » MotioninJoy install and config » Windows 64bits system


Who is online

Users browsing this forum: Google Adsense [Bot], Yahoo [Bot] and 5 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: