| Author |
Message |
|
jeremiahburt
|
Post subject: Sixaxis controller working in windows 7, not motionjoy.  Posted: Fri Aug 13, 2010 3:51 am |
|
 |
| user |
Joined: Fri Aug 13, 2010 3:40 am
Posts: 1
|
|
I am running x64 version of Win 7. I got everything installed after disabling the forced driver signing predominantly via a cmd prompt entry (windows desktop says "Test Mode" at the moment to show me I have disabled driver signing).
Windows recognizes the Sixaxis, and I am able to test out the motion. Problem is, the analog sticks don't work. The motionjoy program tells me there is also "No Controller Detected" even though Windows sees it.
I have also successfully loaded everything via the motionjoy driver manager.
What I see when I click "About" in the motionjoy program is DS3_Tool version 0.5.0003, but the Driver version is 0.0.0000. I have installed all updates through the motionjoy program. This puzzles me to no end. What the heck is going on, why is the driver version 0.0.0000, and why does the motionjoy say there is no controller when Windows recognizes it (minus the analog sticks)?
Please help. Any suggestions here would be appreciated.
| Attachments: |
File comment: Included is a screenshot of the weird driver version number.
Image 1.jpg [ 174.8 KiB | Viewed 12533 times ]
|
|
|
  |
|
 |
| Sponsor |
|
|
|
Acxie
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Fri Aug 13, 2010 6:35 am |
|
|
| MotioninJoy Developer |
Joined: Mon Jul 27, 2009 11:29 pm
Posts: 709
|
|
Try to unplug and replug the USB cable and restart the ds3tool.
|
|
| |
|
|
|
extra_dessert
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Fri Aug 13, 2010 7:36 am |
|
|
| MotioninJoy Guru |
 |
Joined: Fri May 14, 2010 4:20 am
Posts: 1264
|
|
Try the driver signing method at the end of the Wiki install instructions, as the drivers aren't loaded if the DS3 Tool reports a driver of 0.0.0000.
Also do the sticks work if you enable the Analog Gamepad 3 profile in the QuickStart menu? As the normal Windows drivers wont even recognize button presses, which you say is working for you.
|
|
| |
|
|
|
omdodger
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Mon Oct 04, 2010 12:26 am |
|
|
| user |
Joined: Sun Oct 03, 2010 12:32 am
Posts: 6
|
Same problem, the gamepad works good but analog dont  :(
|
|
| |
|
|
|
extra_dessert
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Mon Oct 04, 2010 11:04 pm |
|
|
| MotioninJoy Guru |
|
Joined: Fri May 14, 2010 4:20 am
Posts: 1264
|
omdodger wrote: Same problem, the gamepad works good but analog dont :( Enable the Analog gamepad 3 profile in the DS3 Tool.
|
|
| |
|
|
|
aesoa
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Wed Oct 06, 2010 9:17 pm |
|
|
| user |
Joined: Wed Oct 06, 2010 9:06 pm
Posts: 2
|
|
I am having this same problem and I've tried all the steps, the analog sticks still won't work.
It worked fine when I first installed it a couple days ago, just the analog randomly stopped working yesterday. It stopped giving me the "no controller" problem when I signed the drivers.
|
|
| |
|
|
|
aesoa
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Thu Oct 07, 2010 1:11 am |
|
|
| user |
Joined: Wed Oct 06, 2010 9:06 pm
Posts: 2
|
Embarassing retraction.. I failed to use the "enable" button.. Oh well, signing the drivers and stuff couldn't hurt 
|
|
| |
|
|
|
extra_dessert
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Thu Oct 07, 2010 6:56 am |
|
|
| MotioninJoy Guru |
|
Joined: Fri May 14, 2010 4:20 am
Posts: 1264
|
aesoa wrote: Embarassing retraction.. I failed to use the "enable" button.. Oh well, signing the drivers and stuff couldn't hurt Another case of the DS3 Tool fails to remember and activate the last used profile after a reboot...
|
|
| |
|
|
|
FilleMang
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Fri Nov 19, 2010 4:07 am |
|
|
| user |
Joined: Fri Nov 19, 2010 4:05 am
Posts: 1
|
extra_dessert wrote: Another case of the DS3 Tool fails to remember and activate the last used profile after a reboot... Is there any fix for this problem? Its driving me mad...
|
|
| |
|
|
|
extra_dessert
|
Post subject: Re: Sixaxis controller working in windows 7, not motionjoy. Posted: Fri Nov 19, 2010 11:52 pm |
|
|
| MotioninJoy Guru |
|
Joined: Fri May 14, 2010 4:20 am
Posts: 1264
|
|
I would think there is a fix for it, that would be something to ask Acxie.
|
|
| |
|
|
|
Bluetooth 2.1+EDR Adapter for MotioninJoy
More