| Author |
Message |
|
Acxie
|
Post subject: Please help to test the version 0.6.0000 alpha  Posted: Fri Aug 13, 2010 2:42 pm |
|
 |
| MotioninJoy Developer |
Joined: Mon Jul 27, 2009 11:29 pm
Posts: 709
|
|
  |
|
 |
| Sponsor |
|
|
|
drayn
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 12:11 am |
|
|
| user |
Joined: Sat Aug 14, 2010 12:08 am
Posts: 2
|
|
How Do I Get Local mode to work. I assume Its for offline use, am I Correct?
Greatly Apreciated, and I love the new interface. But please help =D
|
|
| |
|
|
|
Acxie
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 7:12 am |
|
|
| MotioninJoy Developer |
Joined: Mon Jul 27, 2009 11:29 pm
Posts: 709
|
drayn wrote: How Do I Get Local mode to work. I assume Its for offline use, am I Correct?
Greatly Apreciated, and I love the new interface. But please help =D unzip the local.zip in the motioninjoy installing folder. Motioninjoy installing folder default is "C:\Program Files\MotioninJoy\ds3". refer to the local.jpg
| Attachments: |
local.jpg [ 9.62 KiB | Viewed 37743 times ]
|
local.zip [68.77 KiB]
Downloaded 21481 times
|
|
|
| |
|
|
|
Acxie
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 7:50 am |
|
|
| MotioninJoy Developer |
Joined: Mon Jul 27, 2009 11:29 pm
Posts: 709
|
Hazado wrote: I get a BSOD when I attempt to install the drivers.
Says SYSTEM SERVICE EXCEPTION
Not sure what Im doing wrong. Did you uninstall the old version before installing the drivers? If not I think maybe the old version make the BSOD,when you click the "load" button the program will uninstall the old version first. to uninstall the driver like unplug the device,the old version make BSOD between times after unplugging DS3.
|
|
| |
|
|
|
ReFracture
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 4:27 pm |
|
|
| user |
Joined: Thu Aug 12, 2010 6:26 pm
Posts: 17
|
|
I uninstalled the old version before installing the alpha. After clicking 'load' drivers, DS3 tool is unable to activate my gamepad through USB. Odd, it worked fine with v5.
|
|
| |
|
|
|
Acxie
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 5:26 pm |
|
|
| MotioninJoy Developer |
Joined: Mon Jul 27, 2009 11:29 pm
Posts: 709
|
|
Did you mean nothing appear after click "load" button?
|
|
| |
|
|
|
ReFracture
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 6:43 pm |
|
|
| user |
Joined: Thu Aug 12, 2010 6:26 pm
Posts: 17
|
No, I see text appear below regarding the driver load. After it finishes, this is all I get on the quick start page: As you can see, no controller is listed. http://img237.imageshack.us/img237/1966 ... rd01pd.jpgLet me do it again and copy/paste all the output. Code: This may take a few seconds.Please wait a moment!INFO:ENTER: DriverPackageInstallW. Error code:0
WARNING:DRIVER_PACKAGE_LEGACY_MODE flag set but not supported on Plug and Play driver on VISTA. Flag will be ignored.. Error code:0
INFO:Looking for Model Section [MotioninJoy.NTamd64.6.0].... Error code:0
INFO:Installing INF file 'C:\Program Files\MotioninJoy\ds3\drivers\MijXinput.inf' (Plug and Play).. Error code:0
INFO:Looking for Model Section [MotioninJoy.NTamd64.6.0].... Error code:0
INFO:Installing devices with Id "USB\VID_054C&PID_0268&REV_0100" using INF "C:\Windows\System32\DriverStore\FileRepository\mijxinput.inf_amd64_neutral_87ac2bbfd544fc57\MijXinput.inf".. Error code:0
INFO:Will force install because driver is not better and force flag is set.. Error code:0
INFO:ENTER UpdateDriverForPlugAndPlayDevices.... Error code:0
SUCCESS:RETURN UpdateDriverForPlugAndPlayDevices.. Error code:0
INFO:Installation was successful.. Error code:0
INFO:Installing devices with Id "USB\VID_1131&PID_1001&REV_0373" using INF "C:\Windows\System32\DriverStore\FileRepository\mijxinput.inf_amd64_neutral_87ac2bbfd544fc57\MijXinput.inf".. Error code:0
INFO:Will force install because driver is not better and force flag is set.. Error code:0
INFO:ENTER UpdateDriverForPlugAndPlayDevices.... Error code:0
SUCCESS:RETURN UpdateDriverForPlugAndPlayDevices.. Error code:0
INFO:Installation was successful.. Error code:0
INFO:Marked Phantom Device with Hardware/Compatible Id 'USB\VID_1131&PID_1001&REV_0373' for reinstall on next plug-in.. Error code:0
INFO:Marked Phantom Device with Hardware/Compatible Id 'USB\VID_1131&PID_1001&REV_0373' for reinstall on next plug-in.. Error code:0
INFO:Marked Phantom Device with Hardware/Compatible Id 'USB\VID_1131&PID_1001&REV_0373' for reinstall on next plug-in.. Error code:0
SUCCESS:Install completed. Error code:0
INFO:RETURN: DriverPackageInstallW (0x0). Error code:0
|
|
| |
|
|
|
Acxie
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 6:55 pm |
|
|
| MotioninJoy Developer |
Joined: Mon Jul 27, 2009 11:29 pm
Posts: 709
|
|
Try to restart the ds3_tool.
|
|
| |
|
|
|
ReFracture
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 7:23 pm |
|
|
| user |
Joined: Thu Aug 12, 2010 6:26 pm
Posts: 17
|
|
No change after restarting.
|
|
| |
|
|
|
jadas
|
Post subject: Re: Please help to test the version 0.6.0000 alpha Posted: Sat Aug 14, 2010 8:08 pm |
|
|
| user |
Joined: Sat Aug 14, 2010 8:06 pm
Posts: 6
|
|
I have exactly the same problem as ReFracture.
Also when I start DS3_tool always prompts me for an update, which installs the older version.
|
|
| |
|
|
|
Bluetooth 2.1+EDR Adapter for MotioninJoy
